Flat Flexible Conductor

Custom Flexstrip® Jumpers

Printed Circuit Termination Services

Flat Flexible Cable Assembly

Length

• Cut to required length from stock.

Pitch

• .050" [1.27mm]
• .075" [1.905mm]
• .100" [2.54mm]

Terminations (either or both ends)

• Solder Tabs
• Receptacles
• Pins (.100" pitch only)
• Blunt-cut with Tin Prepared End(s) (For ZIF Connectors)

Receptacle and Pin Housings

• Single Row
• Double Row
• Plain
• Detent
• Latching

Solder Tab Configurations

• Straight
• Right Angle
• Z-Bend (Staggered Straight)

Cable Folds

• 45°
• 90°

Stock

• 2 to 50 Conductor Cable

Flexstrip® Jumpers

Create a part number and request a quote

Insulation Material

• Nomex® (standard)
• Polyester
• Kapton®
• Teflon®

Pitch

• .050" [1.27mm]
• .075" [1.905mm]
• .100" [2.54mm]
• .150" [3.81mm]
• .200" [5.08mm]
• 1.0mm
• 1.25mm
• 2.0mm

Insulation Length

• .05" Min to 34" Max in .1" increments
• Standard Gopher Stick = 1" to 4"

Pin Configurations

• Any combination of:
  • Straight
  • Right Angle
  • Right Angle Staggered
  • Straight Staggered

Pin Configurations

• Standard pin length is .125"
• Other pin lengths are available upon request

Create a part number and request a quote

Membrane Switch and Printed Circuit Termination Services

Create a part number and request a quote

Insulation Material

• Kapton®
• Mylar
• Teflon®

Pitch

• .050" [1.27mm]
• .075" [1.905mm]
• .100" [2.54mm]

Termination and Housing

• .050" Pitch
  • Solder Tabs
  • Receptacles (With or without housings)
• .075" Pitch
  • Solder Tabs
  • Pins (Without housings)
  • Receptacles (Without housings)
• .100" Pitch
  • Solder Tabs
  • Pins (With or without housings
  • Receptacles (With or without housings)

Compliance

• All terminations are compliant with Tyco Electronics' AMP Application Specifications 114-16008 and 114-16015

Test and Compliance Certficates are available upon request.

Create a part number and request a quote