A new power distribution Class J fuse block was introduced by the Bussmann. The fuse block with power distribution capability uses up to 50% less panel space and decreases installation time and labor by 33% by reducing the number of components required in the circuit. The patented product is available with 100 A, 200 A, and 400 A ratings, appropriate for heating, ventilation, and air conditioning applications.
The distribution fuse block is available in 1-, 2-, and 3-pole versions with individual pole versions having a dovetail feature that allows point-of-use assembly depending on the number of poles. With a smaller footprint and a 200 kiloamps (kA) withstand rating, the product helps panel builders achieve a higher assembly short circuit current rating (SCCR) for compliance with National Electric Code Sections 110.10, 409.22, 440.4(B), 670.3(A)(4), and 670.5. In addition, products offer a voltage (V) rating of 600 V and a Class J fuse amperage (A) range of 70 A to 400 A.
Speaker Horns/Loud Speakers are now available from Mallory Sonalert through Gopher Electronics. These Paging/PA Speakers can be used indoor or outdoor, and are available from 10 Watts to 30 Watts, in plastic and gray aluminum.
- Industrial Plants
- Construction Sites
- Transportation Terminals
- Recreation Areas.
Alpha Wire introduces a cable, wire, and tubing solution set optimized for the medical device market. This portfolio of products has been created to meet the needs of medical manufacturers of diagnostic equipment such as MRI and CAT scanners, laboratory equipment, adjustable beds, and other noninvasive testing and treatment equipment.
Alpha Wire cable, wire, and tubing solutions are optimized for many medical device applications, including:
- CT scanners
- MRI machines
- Dialysis and blood centrifuge machines
- Adjustable hospital beds
- EEG and EKG devices
- Medical robots
Honeywell has extended its Zephyr™ airflow sensor portfolio with a new digital version that provides an airflow range from 0 to 20 SLPM (Standard Liters per Minute) and 0 to 200 SLPM. Honeywell’s new Zephyr™ airflow sensor has been designed specifically for customers who don’t want to create their own bypass solution. With this new launch, Honeywell has affixed the Zephyr building block airflow sensor directly to the bypass. This design eliminates customers having to design their own bypass, saving them time and effort.
Honeywell Zephyr™ HAF Series sensors provide a digital interface for reading airflow over specified full-scale flow and compensated temperature ranges. The thermally isolated heater and temperature sensing elements help these sensors provide a fast response to air or gas flow.
Zephyr sensors are designed to measure mass flow of air and other non-corrosive gases. Standard flow ranges are 20 SLPM or 200 SLPM, with custom flow ranges available. The sensors are fully calibrated and temperature compensated with an onboard Application Specific Integrated Circuit (ASIC).
Honeywell Zephyr™ Digital Airflow Sensors are now available in airflow ranges from as low as 10 SLPM (Standard Liters per Minute) to as high as 300 SLPM—the industry’s broadest airflow sensing range.
||New low flow ranges: 0-10 and 0-15 SLPM
||New high flow ranges: 0-50, 0-100, 0-200 and 0-300 SLPM
• Anesthesia delivery machines
• Ventricular assist devices (heart pumps)
• Patient monitoring systems (respiratory monitoring)
• Analytic instrumentation (spectrometry, chromatography)
• Air-to-fuel ratio
• Fuel cells
• Fume hoods
• Gas leak detection
• Gas meters